Saturday, August 18, 2012

Rostock Fiinally printed something reasonable

Finally got it working reliably enough to print something. I had to slow it down and loosen the tension on the belts a little. But it ran solidly for 1.5 hours. See just have to say nasty things sometimes :-)   Its a mobile phone holder. 8cm high .3mm layer height.





3 comments:

  1. Congrats - hopefully this put a little charge back into your depleted batteries? Good Job!

    ReplyDelete
  2. g'day,
    It still appears to be a bit twitchy. Next test print failed. At one small point it skipped a step when moving. I prolly have to tweak the voltages to the drive motors a little to give them a little more torque

    ReplyDelete
  3. Regardless of your industry, you should be able to find a desktop phone holder shape that is ideal for your promotion. Cell phone stressballs are available in apple shapes, car and van shapes, chair shapes and computer shapes just to name a few. The more popular they become the more shapes are being introduced.
    e_cell

    ReplyDelete